In this post, we will see the book Strength of Materials by N. M. Belyaev.
About the book:
The new edition of Strength of Materials by N. M. Belyaev has been published after 11 years. In 33 years that lapsed between the publication by N. M. Belyaev of the first edition in 1932 and the last fourteenth edition in 1965 a total of 675 000 copies of the book were sold, testifying to its wide popularity. During this period the book was periodically enlarged and revised by N. M. Belyaev and, after his death in 1944, by a group of four of his co-workers. This group, which prepared from the fifth to the fourteenth editions for publication, did not consider it proper to make substantial changes in the original work of N. M. Belyaev. Additions were done at one time or another only when they became absolutely necessary due to changes in standards and technical specifications and in the light of recent research.
In the present edition, prepared by the same group, a number of topics have been dropped either owing to their irrelevance to strength of materials or because they are rarely taught in the main course.
Considering the availability of a large number of problem books (see, for instance, Problems on Strength of Materials edited by V. K. Kachurin) on the market, most of the examples have been dropped from the present edition. Only examples that are essential for the explanation of theoretical part have been retained. For greater compactness the problem of design for safe loads has now been included in Chapter 26 For the first time the chapter includes the principles of design for limiting states, which though beyond the limits of the basic course of strength of materials are important enough to require an exposition of the basic concepts even at this stage of teaching.
The problems of strength, which in the previous editions occupied two chapters, have been grouped into one. The part dealing with actual stresses has been transferred to Chapter 2, where it has been presented in a sufficiently detailed manner. The tables containing data on materials have been dropped from the appendices. A part of the data on materials has been transferred to 8 Preface to the Fifteenth Russian Edition corresponding sections. The obsolete steel proliles grading has been replaced by new ones.
As in the previous editions it was our endeavour to preserve Belyaev’s style and method of presentation of material. Therefore the author’s text has in general been preserved. If Nikolai Mikhailovich Belyaev were alive today he would possibly write many things in a different way. However, since the book won wide popularity as written by N. M. Belyaev, we tried to preserve the original text as far as possible.
(perhaps someone with an engineering background can post a much better review)
The book was translated from the Russian by N. K. Mehta and was published by Mir in 1979. This is the fifteenth edition of the book.
All credits to the original uploader. Credits to Tor, db.jan for posting the links.
The Internet Archive Link (djvu only) from IA user quailhacker
The Internet Archive Link (pdf+other formats) and here
Contents
PART 1. Introduction. Tension and Compression
Chapter 1. Introduction 17
§ 1. The science of strength of materials 17
§ 2. Classification of forces acting on elements of structures 18
§ 3. Deformations and stresses 21
§ 4. Scheme of a solution of the fundamental problem of strength of materials 23
§ 5. Types of deformations 27
Chapter 2. Stress and Strain in Tension and Compression Within the Elastic Limit Selection of Cross-sectional Area 27
§ 6. Determining the stresses in planes perpendicular io tile axis of the bar 27
§ 7. Permissible stresses. Selecting the cross-sectional area 30
§ 8. Deformations under tension and compression. Hooke’s law 32
§ 9. Lateral deformation coefficient. Poisson’s ratio 36
Chapter 3. Experimental Study of Tension and Compression In Various Materials and
the Basis of Selecting the Permissible Stresses 40
§ 10. Tension test diagram. Mechanical properties of materials 40
§ 11. Stress-strain diagram 47
§ 12. True stress-strain diagram 48
§ 13. Stress-strain diagram for ductile and brittle materials 62
§ 14. Rupture in compression of brittle and ductile materials. Compression test diagram 64
§ 16. Comparative study of the mechanical properties of ductile and brittle materials 57
§ 16. Considerations in selection of safety factor 59
§ 17. Permissible stresses under tension and compression for various materials 64
PART II. Complicated Cases of Tension and Compression
Chapter 4. Design of Statically Indeterminate Systems for Permissible Stresses 66
$ 18. Statically indeterminate systems 66
§ 19. The effect of manufacturing inaccuracies on the forces acting in the elements of statically indeterminate structures 73
§ 20. Tension and compression in bars made of heterogeneous materials 77
§ 21. Stresses due to temperature change 79
§ 22. Simultaneous account for various factors 82
§ 23. More complicated cases of statically indeterminate structures 85
Chapter 5. Account for Dead Weight In Tension and Compression* Design of Flexible Strings 88
§ 24. Selecting the cross-sectional area with the account for the dead weight (in tension and compression) 86
§ 25. Deformations due to dead weight 81
§ 26. Flexible cables 92
Chapter 6. Compound Stressed State. Stress and Strain 99
§ 27. Stresses along Inclined sections under axial tension or compression (uniaxial stress) 99
§ 28. Concept of principal stresses. Types of stresses of materials 101
§ 29. Examples oil biaxial and triaxial stresses. Design of a cylindrical reservoir 103
§ 30. Stresses In a biaxial stressed state 107
§ 31. Graphic determination of stresses (Mohr’s circle) 110
§ 32. Determination of the. principal stresses with the help of the stress circle 114
§ 33. Stresses in triaxial stressed state 117
§ 34. Deformations In the compound stress 121
§ 35. Potential energy of elastic deformation in compound stress 124
§ 36. Pure shear. Stresses and strains. Hooke’s law. Potential energy 127
Chapter 7. Strength of Materials in Compound Stress 132
§ 37. Resistance to failure. Rupture and shear 132
§ 38. Strength theories 136
§ 39. Theories of brittle failure (theories of rupture) 138
§ 40. Theories of ductile failure (theories of shear) 140
§ 41. Reduced stresses according to different strength theories 147
§ 42. Permissible stresses in pure shear 149
PART III. Shear and Torsion
Chapter 8. Practical Methods of Design on Shear 151
§43. Design of riveted and bolted joints 151
§44. Design of welded joints 158
Chapter 9. Torsion. Strength and Rigidity of Twisted Bars 164
§ 45. Torque 164
§ 46. Calculation of torques transmitted to the shaft 167
§ 47. Determining stresses in a round shaft under torsion 168
§ 48. Determination of polar moments of inertia and section moduli of a shaft section 174
§ 49. Strength condition in torsion 176
§ 50. Deformations in torsion. Rigidity condition 176
§ 51. Stresses under torsion in a section inclined to the shaft axis 178
§ 52. Potential energy of torsion 180
§ 53. Stress and strain In dose-coiled helical springs 181
§ 54. Torsion in rods of non-circular section 187
PART IV. Bending. Strength of Beams
Chapter 10. Internal Forces In Bending. Shearing-force and Bending-moment Diagrams 198
$ 55. Fundamental concepts of deformation in bending. Construction of beam supports 195
§ 56. Nature of stresses in a beam. Bending moment and shealine force 200
§ 57. Differential relation between the intensity of a continuous load, shearing force and bending moment 205
§ 58. Plotting bending-moment and shearing-force diagrams 207
§ 59. Plotting bending-moment and shearing-force diagrams for more complicated loads 214
§ 60. The check of proper plotting of Qr and M-diagrams 221
§ 61. Application of the principle of superposition of forces In plotting shearing-force and bending-moment diagrams 223
Chapter 11. Determination of Normal Stresses in Bending and Strength of Beams 225
§ 62. Experimental investigation of the working of materials in pure bending 225
§ 63. Determination of norma) stresses In bending. Hooke’s law and potential energy of bending 228
§ 64. Application of the results derived above in checking the strength of beams 235
Chapter 12. Determination of Moments of Inertia of Plane Figures 239
§ 65. Determination of moments of inertia and section moduli for simple sections 239
§ 66. General method of calculating the moments of inertia of complex sections 244
§ 67. Relation between moments of inertia about two parallel axes one of which is the central axis 246
§ 68. Relation between the moments of inertia under rotation of axes 247
§ 69. Principal axes of inertia and principal moments of inertia 250
§ 70. The maximum and minimum values oi the central moments of
inertia 254
§ 71. Application of the formula for determining normal stresses to
beams of non-symmetrical sections 254
§ 72. Radii of inertia. Concept of the momenta! ellipse 256
§ 73. Strength check, choice of section and determination of permissible load in bending 258
Chapter 13. Shearing and Principal Stresses In Beams 263
§ 74. Shearing stresses in a beam of rectangular section 263
§ 75. Shearing stresses in I-beams 270
§ 76. Shearing stresses in beams of circular and ring sections 272
§ 77. Strength check for principal stresses 275
§ 78. Directions the principal stresses 280
Chapter 14. Shear Centre. Composite Beams 283
§ 79. Shearing stresses parallel to the neutral axis. Concept of shear centre 233
§ 80, Riveted and welded beams 289
PART V. Deformation of Beams due to Bending
Chapter 15. Analytical Method of Determining Deformations 292
§ 81. Deflection and rotation oi beam sections 292
$ 82. Differential equation of the deflected axis 294
§ 83. Integration oi the differentia) equation of the deflected axis of a beam fixed at one end 296
84. Integrating the differential equation of the deflected axis of a simply supported beam 299
§ 85. Method of equating the constants of integration oi differential equations when the beam has a number of differently loaded portions 301
§ 86. Method of initial parameters for determining displacements in beams 304
§ 87, Simply supported beam unsymmetrically loaded by a force 305
§ 88. Integrating the differential equation for a hinged beam 307
§ 89. Superposition of forces 310
§ 90. Differential relations in bending 312
Chapter 16. Graph-analytic Method of Calculating Displacement in Bending 313
§ 91. Graph-analytic method 313
§ 92. Examples of determining deformations by the graph-analytic method 317
§ 93. The graph-analytic method applied to curvilinear bending-moment diagrams 320
Chapter 17. Non-uniform Beams 324
§ 94. Selecting the section in beams of uniform strength 324
§ 95. Practical examples of beams of uniform strength 325
§ 96. Displacements in non-uniform beams 326
PART VI. Potential Energy. Statically Indeterminate Beams
Chapter 18. Application of the Concept of Potential Energy in Determining Displacements 331
§ 97. Statement of the problem 331
§ 98. Potential energy in the simplest cases of loading 333
§ 99. Potential energy ior the case of several forces 334
§ 100. Calculating bending energy using internal forces 336
§ 101. Castigliano’s theorem 337
$ 102. Examples of application of Castigiiano’s theorem 341
$ 103. Method of introducing an external force 344
§ 104. Theorem of reciprocity of works 346
§ 105. The theorem of Maxwell and Mohr 347
§ 106. Vereshchagin’s method 349
§ 107. Displacements In frames 351
§ 108. Deflection of beams due to shearing force 353
Chapter 19. Statically indeterminate Beams 356
§ 109. Fundamental concepts 356
§ 110. Removing static indeterminacy via the differential equation of the deflected beam axis 357
§ 111. Concepts of redundant unknown and base beam 359
§ 112. Method of comparison of displacements 360
§ 113. Application of the theorems of Castigliano and Mohr and Vereshchagin’s method 362
§ 114. solution of a simple statically Indeterminate frame 364
§ 115. Analysis of continuous beams 366
§ 116. The theorem of three moments 366
§ 117. An example on application erf the theorem of three moments 372
§ 118. Continuous beams with cantilevers. Beams with rigidly fixed ends 375
PART VII. Resistance Under Compound Loading
Chapter 20. Unsymmetric Bending 378
§ 119. Fundamental concepts 378
§ 120. Unsymmetric bending. Determination of stresses 379
§ 121. Determining displacements in unsymmetric bending 365
Chapter 21. Combined Bending and Tension or Compression 389
§ 122. Deflection of a beam subjected to axial and lateral forces 389
§ 123. Eccentric tension or compression 392
§ 124. Core of section 396
Chapter 22. Combined bending and torsion 401
§ 125. Determination erf twisting and bending moments 401
§ 126. Determination of stresses and strength check In combined bending and torsion 404
Chapter 23. General Compound Loading 408
§ 127. Stresses in a bar section subjected to general compound loading 408
§ 128. Determination of normal stresses 410 1129. Determination of shearing stresses 413
130. Determination of displacements 414
131. Design of a simple crank rod 417
Chapter 24. Curved Bars 423
§ 132. General concepts 423
§ 133. Determination of bending moments and normal and shearing forces 424
§ 134. Determination of stresses due to normal and shearing forces 420
§ 135. Determination of stresses due to bending moment 427
§ 136. Computation of the radius of curvature of the neutral layer in a rectangular section 433
§ 137. Determination of the radius of curvature oi the neutral layer for circle and trapezoid 434
§ 138. Determining the location of neutral layer from tables 436
§ 139. Analysis of the formula for normal stresses In a curved bat 436
§ 140. Additional remarks on the formula for normal stresses 439
§ 141. An example on determining stresses in a curved bar 441
1 142. Determination of displacements in curved bars 442
§ 143. Analysis of a circular ring 445
Chapter 25. Thick-walled and Thin-walled Vessels 446
$ 144. Analysis of thick-walled cylinders 446
§ 145. Stresses in thick spherical vessels 453
§ 146. Analysis of thin-walled vessels 454
Chapter 26. Design for Permissible toads. Design for Limiting States 467
§ 147. Design for permissible loads. Application to statically determinate systems 457
§ 146. Design or statically indeterminate systems under tension or compression by the method of permissible loads 458
§ 149. Determination of limiting lifting capacity of a twisted rod 462
§ 150. Selecting beam section Tor permissible loads 465
§ 151. Design of statically indeterminate beams for permissible loads. The fundamentals. Analysis of a two-span beam 468
§ 152. Analysis of a three-span beam 472
§ 153. Fundamentals of design by the method of limiting states 474
PART VIII. Stability of Clements of Structures
Chapter 27. Stability ot Ban Under Compression 477
§ 154. Introduction. Fundamentals of stability of shape of compressed bars 477
6 155. Euler’s formula for critical force 480
§ 156. Effect of constraining the bar ends 484
§ 157. Limits of applicability of Euler’s formula. Plotting of the diagram of total critical stresses 488
§ 158. ‘The stability check of compressed bars 494
§ 159. Selection of the type of section and material 498
§ 160. Practical importance of stability check 502
Chapter 28. More Complicated Questions of Stability in Elements of Structures 604
§ 161. Stability of plane surface in bending of beams 504
§ 162. Design of compressed-bent ban 512
§ 163. Effect of eccentric compressive force and initial curvature of bar 517
PART IX. Dynamic Action of Forces
Chapter 29. Effect of Forces of Inertia. Stresses due to Vibrations 521
§ 164. Introduction 521
§ 165. Determining stresses in uniformly accelerated motion of bodies 523
§ 166. Stresses In a rotating ring (flywheel rim) 524
§ 167. Stresses in connecting rods 525
$ 168. Rotating disc of uniform thickness 529
1 169. Disc o f uniform strength 533
§ 170. Effect of resonance on the magnitude of stresses 535
§ 171. Determination of stresses in elements subjected to vibration 536
§ 172. The effect of mass of the elastic system on vibrations 541
Chapter 30. Stresses Linder Impact Loading 548
§ 173. Fundamental concepts 548
§ 174. General method of determining stresses under impact loading 549
§ 175. Concrete cases of determining stresses and conducting strength checks under impact 5S4
$ 176. Impact stresses in a non-uniform bat 559 1177. Practical conclusions from the derived results 660
178. The effect of mass of the elastic system on impact 562
179. Impact testing for failure 565
180. Effect of various factors on the results of impact testing 568
Chapter 31. Strength Check of Materials Under Variable Loading 571
§ 181. Basic ideas concerning the effect of variable stresses on the – strength of materials 571
§ 182. Cyclic stresses 573
§ 183. Strength condition under variable stresses 575
§ 184. Determination of endurance limit in a symmetrical cycle 576
1 185. Endurance limit in an unsymmetrical cycle 579
1 186. Local stresses 682
§ 187. Effect of size of part and other factors on endurance limit 589
§ 188. Practical examples of failure undo: variable loading. Causes of
emergence and development of fatigue cracks 593
§ 189. Selection of permissible stresses 597
§ 190. Strength check under variable stresses and compound stressed state 600
§ 191. Practical measures for preventing fatigue failure 602
Chapter 32. Fundamentals of Creep Analysis 605
§ 192. Effect of high temperatures on mechanical properties of metals 605
§ 193. Creep and after-effect 607
§ 194. Creep and after-effect curves 609
§ 195. Fundamentals of creep design 615
§ 196. Examples on creep design 620
Appendix 630
Name index 639
Su
Mir Books 