Statically indeterminate trusses have been long studied. It has been proven that a redundant link is necessary for static indeterminacy to evolve. This is believed to hold true for mechanisms as well. However, one rarely encounters mechanisms with a redundant link, and therefore their study has often been deemed unnecessary.
It has been found, though, that static indeterminacy may occur in mechanisms without redundant links if their kinematic pairs impose redundant constraints—those which fail to reduce the mobility of the mechanism (such constraints were at one time also referred to as passive). It appears that the majority of mechanisms used in machinery are subject to such constraints.
Redundant constraints cause significant issues. They demand higher accuracy in manufacturing, which increases the cost of machines, and often such accuracy is unattainable due to deformations. The load-bearing capacity and efficiency are reduced, necessitating increases in the weight and size of the machinery.
Therefore, in engineering design, the scientific selection of kinematic pairs (the connections of the links) must aim to eliminate redundant constraints. Mechanisms free of redundant constraints are self-aligning, which explains the title of this book. Its content is dedicated to methods of analysis and design of such mechanisms and their applications across various fields.
Translated from Russian by Leo M. Sachs
You can get the book here and here
Follow us on
Twitter https://x.com/MirTitles
Mastadon https://mastodon.social/@mirtitles
Bluesky https://bsky.app/profile/mirtitles.bsky.social
Tumblr https://www.tumblr.com/mirtitles
Internet Archive https://archive.org/details/mir-titles
Fork us on gitlab https://gitlab.com/mirtitles
Contents
Foreword
Chapter 1. Redundant Constraints and Mobilities in Mechanisms
1.1. General 1.2. Checking Mechanisms for Redundant Constraints 1.3. Determining Classes of Kinematic Pairs without Influence of Clearances on Their Mobility 1.4. Determining Classes of Kinematic Pairs Allowing for Influence of Clearances on Their Mobility 1.5. Detecting Particularly Harmful Redundant Constraints by Planar or Spherical Diagram of Mechanism 1.6. Use of Kinematic Connections in Rational Mechanisms 1.7. [Title illegible in the supplied OCR] 1.8. Non-Planar Constraints and Mobilities for Investigating Structure of Mechanisms 1.9. Influence of Friction upon Self-Aligning of Mechanisms 1.10. Resistance to Self-Alignment in Cylindrical Pairs 1.11. Resistance to Self-Alignment in Planar Pair 1.12. Resistance to Self-Alignment in Spherical Pairs 1.13. Resistance to Self-Alignment of Antifriction Bearing 1.14. Conclusions and Suggestions
Chapter 2. Planar Mechanisms with Lower Pairs
2.1. Connection of Traction Motor with Mechanism 2.2. Supports for Rotary Shafts 2.3. Guideways for Linear Motion 2.4. Wedge Mechanisms 2.5. Screw Mechanisms 2.6. Slider-Crank Mechanism 2.7. Crank-and-Rocker Mechanism 2.8. Parallel Crank Mechanism 2.9. Link Gear Mechanisms 2.10. Degeneration of Assur’s Groups 2.11. Structural Groups of Zero Mobility 2.12. Kinematic Connections with Hydraulic and Electric Restraints 2.13. Kinematic Connections in Electric Locomotives 2.14. Typical Errors in Selection of Structural Designs of Mechanisms 2.15. New Method of Determining Redundant Constraints and Mobilities 2.16. Rational Designs of Fixed Connections 2.17. Self-Aligning Planar Structural Groups of Members of Mechanisms 2.18. Centrifugal Governors 2.19. Valves and Gates 2.20. Conclusions and Suggestions
Chapter 3. Three-Dimensional Mechanisms with Lower Pairs (Turning Joints)
3.1. Multiarm Groups 3.2. Hydraulic Drive Mechanisms 3.3. Helicopter Mechanisms 3.4. Mechanisms of Gyration Crushers 3.5. Universal Joints 3.6. Hooke’s Joints with High-Class Pairs 3.7. Flexible Hooke’s Joints 3.8. Unconventional Double Hooke’s Joint 3.9. Locomotive Mechanisms 3.10. Main Mechanisms of Current Collectors 3.11. Current Collector with Two Mobilities 3.12. Mechanisms of Lift Springs 3.13. Transverse Rigidity of a Current Collector Having Two Levers on the Main Shaft 3.14. Transverse Rigidity of a Current Collector with One Lever on the Main Shaft 3.15. Contact System for Low Temperatures 3.16. Conclusions and Recommendations
Chapter 4. Mechanisms with Higher Pairs
4.1. Cam Mechanisms 4.2. Power Contacts of Electric Apparatus 4.3. Contact Devices in Control Circuitry (Low-Current) 4.4. Gear Trains 4.5. Mechanisms with Single Idler 4.6. Mechanisms with Two Intermediate Gears or Idlers 4.7. Gearing in Load-Handling Machines 4.8. Classification of Traction Drives 4.9. Rational Designs of Traction Reduction Gears 4.10. High-Speed Traction Drive 4.11. Mechanisms with Bevel Gears 4.12. Cylindrical-Bevel Reduction Gear 4.13. Mechanisms of Friction Variable-Speed Drives 4.14. Automotive Transmission (Gearbox) 4.15. Multishift Transmissions with Return Stages 4.16. Self-Alignment in Traction Gearings 4.17. Conclusions and Suggestions
Chapter 5. Planetary Mechanisms
5.1. Mobilities in Single-Row Mechanisms 5.2. Friction in Connection Mechanisms 5.3. Designs of Single-Row Planetary Mechanisms 5.4. Tolerances in Single-Row Mechanisms 5.5. Multirow Single-Stage Reduction Gear with Straight Teeth 5.6. Multisatellite Mechanisms 5.7. Single-Row Planetary Mechanism with Six Self-Aligning Satellite Gears 5.8. Positive Planetary Gearings for Big Transmission Ratios 5.9. Flat Planetary Mechanism with Self-Aligning Satellite Gear 5.10. Mechanism with Free Carrier 5.11. Multiple and Closed Planetary Mechanisms 5.12. Reduction Gears of Wheel Motors 5.13. Method of Structural Groups for Investigating Self-Alignment of Planetary Mechanisms 5.14. Strain Wave Gearings 5.15. Conclusions and Suggestions
Chapter 6. Load-Handling Mechanisms
6.1. Rope Drum Drive 6.2. Pulley Blocks 6.3. Cableways 6.4. Crane Carriages 6.5. Loading Bridges and Movable Conveyors 6.6. Travelling Cranes 6.7. Undercarriage of Building Cranes 6.8. Cranes with Folding Boom (Portal Cranes) 6.9. Elevators 6.10. Roller Supports of Rotary Kilns and Transfer Drums 6.11. Choice of Design of Shoe Brakes 6.12. Bridges 6.13. Bogies for Rolling Stock 6.14. Conclusions and Recommendations
References
Index
